progrmmiere einen microcontroller über die usb schnittstelle und auf einmal is /dev/ttyACM0 und /dev/ttyACM1 verschwunden.
wie kann ich das problem beheben!?!
/dev/ttyACM0 verschwunden
-
- Linux
-
Havoc -
18. März 2007 um 20:31
-
-
hast was geaendert? udev, kernel, kernel-module? sonstige updates?
-
das is ja gerade das komische.
es hat alles reibungslos funktioniert und auf einmal beim nächsten aufruf von make install konnte tty/ACM0 nicht mehr geöffnet werden dann hab ich mir mal /dev angesehen und auf einmal haben die beiden dinger gefehlt.
bin echt voll ratlos was da los is!?! war echt so happy das entlich alles funktioniert hat und jetzt sowas:wein:hab auch keine updates oder sonstiges gemacht...bin mit dem rechner schon bestimmt seit 3 monaten nimmer am netz gehangen.
-
Hast andere USB-Ports durchprobiert?
-
Hast andere USB-Ports durchprobiert?
die usb-ports sind doch im normalfall ttyACMx, oder gibts auch andere benennungen!?!
wenn ich eine externe festplatte dranhäng funktionieren die beiden usb ports und und /dev sind eben die einträge für ttyACM0 und ttyACM1 net mehr da!?!Code
Alles anzeigenmarc@faraday:~/VL Microcontroller/DemoAss$ dmesg [17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Thu Feb 1 19:52:28 UTC 2007 (Ubuntu 2.6.17-11.35-generic) [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [17179569.184000] BIOS-e820: 000000001fff0000 - 000000001ffffc00 (ACPI data) [17179569.184000] BIOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS) [17179569.184000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [17179569.184000] 0MB HIGHMEM available. [17179569.184000] 511MB LOWMEM available. [17179569.184000] On node 0 totalpages: 131056 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] Normal zone: 126960 pages, LIFO batch:31 [17179569.184000] DMI 2.3 present. [17179569.184000] ACPI: RSDP (v000 OID_00 ) @ 0x000e6010 [17179569.184000] ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1ffffbc0 [17179569.184000] ACPI: FADT (v001 0x00000100 _CSI 0x00010101) @ 0x1ffffac0 [17179569.184000] ACPI: BOOT (v001 0x00000100 _CSI 0x00010101) @ 0x1ffffb50 [17179569.184000] ACPI: DBGP (v001 0x00000100 _CSI 0x00010101) @ 0x1ffffb80 [17179569.184000] ACPI: DSDT (v001 0x00001000 MSFT 0x0100000d) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda2 ro quiet splash [17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" [17179569.184000] mapped APIC to ffffd000 (0140b000) [17179569.184000] Enabling fast FPU save and restore... done. [17179569.184000] Enabling unmasked SIMD FPU exception support... done. [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes) [17179569.184000] Detected 1993.918 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179569.608000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.608000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [17179569.624000] Memory: 509920k/524224k available (1911k kernel code, 13680k reserved, 1073k data, 308k init, 0k highmem) [17179569.624000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.704000] Calibrating delay using timer specific routine.. 3992.41 BogoMIPS (lpj=7984836) [17179569.704000] Security Framework v1.0.0 initialized [17179569.704000] SELinux: Disabled at boot. [17179569.704000] Mount-cache hash table entries: 512 [17179569.704000] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 [17179569.704000] CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 [17179569.704000] CPU: Trace cache: 12K uops, L1 D cache: 8K [17179569.704000] CPU: L2 cache: 512K [17179569.704000] CPU: Hyper-Threading is disabled [17179569.704000] CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00000400 00000000 00000000 [17179569.704000] Checking 'hlt' instruction... OK. [17179569.720000] SMP alternatives: switching to UP code [17179569.720000] Freeing SMP alternatives: 16k freed [17179569.720000] checking if image is initramfs... it is [17179570.332000] Freeing initrd memory: 5390k freed [17179570.332000] ACPI: Core revision 20060707 [17179570.384000] ACPI: Looking for DSDT ... not found! [17179570.384000] ACPI: setting ELCR to 0200 (from 0c20) [17179570.392000] CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07 [17179570.392000] SMP motherboard not detected. [17179570.392000] Local APIC not detected. Using dummy APIC emulation. [17179570.392000] Brought up 1 CPUs [17179570.392000] migration_cost=0 [17179570.392000] NET: Registered protocol family 16 [17179570.392000] EISA bus registered [17179570.392000] ACPI: bus type pci registered [17179570.424000] PCI: PCI BIOS revision 2.10 entry at 0xe9b54, last bus=2 [17179570.424000] PCI: Using configuration type 1 [17179570.424000] Setting up standard PCI resources [17179570.452000] ACPI: Interpreter enabled [17179570.452000] ACPI: Using PIC for interrupt routing [17179570.456000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179570.456000] PCI: Probing PCI hardware (bus 00) [17179570.456000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [17179570.460000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [17179570.460000] PCI quirk: region 1300-133f claimed by ICH4 GPIO [17179570.460000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [17179570.460000] Boot video device is 0000:01:00.0 [17179570.460000] PCI: Transparent bridge - 0000:00:1e.0 [17179570.460000] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') [17179570.460000] Please report the result to linux-kernel to fix this permanently [17179570.460000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179570.464000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [17179570.464000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [17179570.472000] ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode. [17179570.472000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 7 *10 11) [17179570.472000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 6 7 10 11) [17179570.472000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 7 10 *11) [17179570.472000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 7 *10 11) [17179570.472000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 7 10 11) *0, disabled. [17179570.472000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 7 10 11) *0, disabled. [17179570.476000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 7 10 11) *0, disabled. [17179570.476000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 7 10 11) *0, disabled. [17179570.476000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179570.476000] pnp: PnP ACPI init [17179570.480000] pnp: PnP ACPI: found 12 devices [17179570.480000] PnPBIOS: Disabled by ACPI PNP [17179570.480000] PCI: Using ACPI for IRQ routing [17179570.480000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179570.484000] pnp: 00:07: ioport range 0x680-0x6ff has been reserved [17179570.484000] pnp: 00:07: ioport range 0x200-0x20f has been reserved [17179570.484000] pnp: 00:07: ioport range 0x1000-0x107f could not be reserved [17179570.484000] pnp: 00:07: ioport range 0x1300-0x133f has been reserved [17179570.484000] PCI: Bridge: 0000:00:01.0 [17179570.484000] IO window: c000-dfff [17179570.484000] MEM window: e0000000-efffffff [17179570.484000] PREFETCH window: 90000000-9fffffff [17179570.484000] PCI: Bus 3, cardbus bridge: 0000:02:03.0 [17179570.484000] IO window: 0000a400-0000a4ff [17179570.484000] IO window: 0000a800-0000a8ff [17179570.484000] PREFETCH window: 80000000-81ffffff [17179570.484000] MEM window: d2000000-d3ffffff [17179570.484000] PCI: Bridge: 0000:00:1e.0 [17179570.484000] IO window: a000-bfff [17179570.484000] MEM window: d0000000-dfffffff [17179570.484000] PREFETCH window: 80000000-8fffffff [17179570.484000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179570.484000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [17179570.484000] PCI: setting IRQ 10 as level-triggered [17179570.484000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [17179570.484000] NET: Registered protocol family 2 [17179570.524000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [17179570.524000] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [17179570.524000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [17179570.524000] TCP: Hash tables configured (established 16384 bind 8192) [17179570.524000] TCP reno registered [17179570.524000] Simple Boot Flag at 0x37 set to 0x1 [17179570.524000] audit: initializing netlink socket (disabled) [17179570.524000] audit(1175866044.524:1): initialized [17179570.524000] VFS: Disk quotas dquot_6.5.1 [17179570.524000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179570.524000] Initializing Cryptographic API [17179570.524000] io scheduler noop registered [17179570.524000] io scheduler anticipatory registered [17179570.524000] io scheduler deadline registered [17179570.524000] io scheduler cfq registered (default) [17179570.524000] isapnp: Scanning for PnP cards... [17179570.880000] isapnp: No Plug & Play device found [17179570.908000] Real Time Clock Driver v1.12ac [17179570.908000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [17179570.908000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [17179570.912000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [17179570.912000] PCI: setting IRQ 5 as level-triggered [17179570.912000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [17179570.912000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [17179570.912000] mice: PS/2 mouse device common for all mice [17179570.912000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179570.912000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179570.912000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179570.912000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179570.916000] i8042.c: Detected active multiplexing controller, rev 1.1. [17179570.920000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [17179570.920000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [17179570.920000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [17179570.920000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [17179570.920000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179570.924000] EISA: Probing bus 0 at eisa.0 [17179570.924000] Cannot allocate resource for EISA slot 1 [17179570.924000] EISA: Detected 0 cards. [17179570.924000] TCP bic registered [17179570.924000] NET: Registered protocol family 1 [17179570.924000] NET: Registered protocol family 8 [17179570.924000] NET: Registered protocol family 20 [17179570.924000] Using IPI No-Shortcut mode [17179570.924000] ACPI: (supports S0 S3 S4 S5) [17179570.924000] Freeing unused kernel memory: 308k freed [17179570.936000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179572.076000] Capability LSM initialized [17179572.124000] ACPI: Processor [CPU0] (supports 4 throttling states) [17179572.720000] ICH3M: IDE controller at PCI slot 0000:00:1f.1 [17179572.720000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [17179572.720000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [17179572.720000] PCI: setting IRQ 11 as level-triggered [17179572.720000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [17179572.720000] ICH3M: chipset revision 2 [17179572.720000] ICH3M: not 100% native mode: will probe irqs later [17179572.720000] ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio [17179572.720000] ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio [17179572.720000] Probing IDE interface ide0... [17179573.008000] hda: IC25N040ATCS04-0, ATA DISK drive [17179573.680000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179573.696000] Probing IDE interface ide1... [17179574.100000] hdc: TOSHIBA DVD-ROM SD-R6012, ATAPI CD/DVD-ROM drive [17179574.784000] ide1 at 0x170-0x177,0x376 on irq 15 [17179574.800000] hda: max request size: 128KiB [17179574.812000] hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(100) [17179574.812000] hda: cache flushes not supported [17179574.812000] hda: hda1 hda2 hda3 [17179574.884000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [17179574.884000] Uniform CD-ROM driver Revision: 3.20 [17179575.468000] ieee1394: Initialized config rom entry `ip1394' [17179575.468000] ACPI: PCI Interrupt 0000:02:03.1[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [17179575.536000] usbcore: registered new driver usbfs [17179575.536000] usbcore: registered new driver hub [17179575.536000] USB Universal Host Controller Interface driver v3.0 [17179575.564000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[d0000800-d0000fff] Max Packet=[2048] IR/IT contexts=[4/4] [17179575.564000] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [17179575.564000] uhci_hcd 0000:02:05.0: UHCI Host Controller [17179575.564000] uhci_hcd 0000:02:05.0: new USB bus registered, assigned bus number 1 [17179575.564000] uhci_hcd 0000:02:05.0: irq 10, io base 0x0000a200 [17179575.564000] usb usb1: configuration #1 chosen from 1 choice [17179575.564000] hub 1-0:1.0: USB hub found [17179575.564000] hub 1-0:1.0: 2 ports detected [17179575.668000] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [17179575.668000] uhci_hcd 0000:02:05.1: UHCI Host Controller [17179575.668000] uhci_hcd 0000:02:05.1: new USB bus registered, assigned bus number 2 [17179575.668000] uhci_hcd 0000:02:05.1: irq 5, io base 0x0000a300 [17179575.668000] usb usb2: configuration #1 chosen from 1 choice [17179575.668000] hub 2-0:1.0: USB hub found [17179575.668000] hub 2-0:1.0: 2 ports detected [17179575.772000] ACPI: PCI Interrupt 0000:02:05.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [17179575.772000] ehci_hcd 0000:02:05.2: EHCI Host Controller [17179575.772000] ehci_hcd 0000:02:05.2: new USB bus registered, assigned bus number 3 [17179575.772000] ehci_hcd 0000:02:05.2: irq 11, io mem 0xd0000000 [17179575.772000] ehci_hcd 0000:02:05.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 [17179575.772000] usb usb3: configuration #1 chosen from 1 choice [17179575.772000] hub 3-0:1.0: USB hub found [17179575.772000] hub 3-0:1.0: 4 ports detected [17179575.928000] Attempting manual resume [17179575.944000] EXT3-fs: INFO: recovery required on readonly filesystem. [17179575.944000] EXT3-fs: write access will be enabled during recovery. [17179576.836000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040d0000010d061] [17179582.380000] kjournald starting. Commit interval 5 seconds [17179582.380000] EXT3-fs: hda2: orphan cleanup on readonly fs [17179582.380000] ext3_orphan_cleanup: deleting unreferenced inode 915174 [17179582.764000] ext3_orphan_cleanup: deleting unreferenced inode 912149 [17179582.772000] EXT3-fs: hda2: 2 orphan inodes deleted [17179582.772000] EXT3-fs: recovery complete. [17179582.788000] EXT3-fs: mounted filesystem with ordered data mode. [17179597.572000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179597.864000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179598.104000] input: PC Speaker as /class/input/input1 [17179598.148000] Linux agpgart interface v0.101 (c) Dave Jones [17179598.152000] agpgart: Detected an Intel i845 Chipset. [17179598.156000] agpgart: AGP aperture is 64M @ 0xa0000000 [17179598.616000] parport: PnPBIOS parport detected. [17179598.616000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [17179598.632000] hw_random hardware driver 1.0.0 loaded [17179598.984000] irda_init() [17179598.984000] NET: Registered protocol family 23 [17179599.076000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [17179599.076000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [17179599.468000] nvidia: module license 'NVIDIA' taints kernel. [17179599.496000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa54ab1, caps: 0x804713/0x0 [17179599.508000] 8139too Fast Ethernet driver 0.9.27 [17179599.536000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [17179599.540000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 0. [17179599.540000] nsc-ircc, chip->init [17179599.540000] nsc-ircc, Found chip at base=0x02e [17179599.540000] nsc-ircc, driver loaded (Dag Brattli) [17179599.540000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179599.540000] nsc-ircc, Found chip at base=0x02e [17179599.540000] nsc-ircc, driver loaded (Dag Brattli) [17179599.540000] nsc_ircc_open(), can't get iobase of 0x2f8 [17179599.540000] pnp: Device 00:0b disabled. [17179599.648000] intel8x0_measure_ac97_clock: measured 55352 usecs [17179599.648000] intel8x0: clocking to 48000 [17179599.648000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [17179599.648000] Yenta: CardBus bridge found at 0000:02:03.0 [1071:8060] [17179599.648000] Yenta: Enabling burst memory read transactions [17179599.648000] Yenta: Using CSCINT to route CSC interrupts to PCI [17179599.648000] Yenta: Routing CardBus interrupts to PCI [17179599.648000] Yenta TI: socket 0000:02:03.0, mfunc 0x01001c00, devctl 0x64 [17179599.664000] ts: Compaq touchscreen protocol output [17179599.880000] Yenta: ISA IRQ mask 0x0058, PCI irq 10 [17179599.880000] Socket status: 30000006 [17179599.880000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [17179599.880000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff [17179599.880000] cs: IO port probe 0xa000-0xbfff: clean. [17179599.880000] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xdfffffff [17179599.880000] pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8fffffff [17179599.888000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 [17179599.888000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 [17179599.888000] eth0: RealTek RTL8139 at 0xe097c000, 00:40:d0:36:bd:75, IRQ 10 [17179599.888000] eth0: Identified 8139 chip type 'RTL-8139C' [17179599.896000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [17179599.896000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006 [17179600.160000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) [17179600.384000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [17179600.600000] cs: IO port probe 0x100-0x3af: clean. [17179600.604000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [17179600.604000] cs: IO port probe 0x820-0x8ff: clean. [17179600.604000] cs: IO port probe 0xc00-0xcf7: clean. [17179600.608000] cs: IO port probe 0xa00-0xaff: clean. [17179600.708000] lp0: using parport0 (interrupt-driven). [17179600.796000] SCSI subsystem initialized [17179600.816000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179600.816000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179600.856000] Adding 1052248k swap on /dev/disk/by-uuid/217b9e29-1ae7-4004-8ced-4040fe966ef3. Priority:-1 extents:1 across:1052248k [17179601.056000] EXT3 FS on hda2, internal journal [17179601.504000] NET: Registered protocol family 17 [17179601.784000] NET: Registered protocol family 10 [17179601.784000] lo: Disabled Privacy Extensions [17179601.784000] IPv6 over IPv4 tunneling driver [17179611.860000] eth0: no IPv6 routers present [17179652.084000] ACPI: AC Adapter [ACAD] (on-line) [17179652.132000] ACPI: Battery Slot [BAT0] (battery present) [17179652.152000] ACPI: Power Button (FF) [PWRF] [17179652.152000] ACPI: Lid Switch [LID] [17179652.152000] ACPI: Sleep Button (CM) [SLPB] [17179652.280000] ibm_acpi: ec object not found [17179652.312000] pcc_acpi: loading... [17179652.448000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [17179655.252000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [17179655.252000] apm: overridden by ACPI. [17179656.076000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [17179656.076000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [17179656.076000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [17179657.840000] ttyS1: LSR safety check engaged! -
ok, ich bin der sache jetzt wieder etwas näher gekommen:
Codemarc@faraday:/dev$ sudo MAKEDEV update udev active, devices will be created in /dev/.static/dev/ You requested 'alsa' devices. Please install the alsa-base package instead, which creates and maintains device information for ALSA. /sbin/MAKEDEV: don't know how to make device "ttyACM"aus irgendeinem grund können also die ttyACM devices nicht erzeugt werden!!:confused:
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!